Fully Automatic V-CUT Machine-Light guide plate equipment-Nantong OLED Intelligent Technology Co.，Ltd.

Fully Automatic V-CUT Machine

2021-01-26

QQ图片20210304154406.png

QQ图片20210304155619.png

Equipment Introduction:

The equipment uses the microstructure of the light-incident end surface of the thousand LGP to be processed by hot pressing, and the microstructure is used to improve the HOTSPOT non-lighting phenomenon of the light-incident part due to the LED lamp pitch distribution.

QQ图片20210304154536.png

Equipment Characteristics:

Single chip processing, high transfer rate of hot-pressed microstructure, stable manufacturing process;

Processing efficiency: 8±1S/PCS (23INCH standard)

Microstructure machining accuracy: ±3um;

High degree of automation, can realize automatic processing and automatic loading and unloading;

Equipment Specification Comparison Table:

NO.	Equipment Name	Specification	Model	Applicable LGP Size	Production Efficiency (min/s)minh	Applicable Materials
1	V-CUT机 (NB LGP)	7~15 6 inch	TC-Q15D	min:15085mm max:350195mm thickness：0.5~2t	(60/7)6011=5650PCS (15.6inch)	PMMA,PC,MS
2	V-CUT机 ((MT LGP))	18~32 inch	TC-Q32D	min:400230mm max:720400mm thickness：1~5t	(60/11.5)6011=3450PCS (32inch)	PMMA,PC,MS
3	V-CUT机 (TV LGP)	42~65 inch	TC-Q65D	min:950520mm max:1450850mm thickness：1~5t	(60/15)6011=2650PCS (65inch)	PMMA,PC,MS

Device Parameters:

Fully Automatic V-CUT
Physical Dimension	L2150mmW1800mmH1600mm
Maximum Feeding Size	650mm*380mm
Minimum Feeding Size	240mm*130mm
Fastest Speed	510pcs/h(60"/7" (1pcs)*60')
Applicable Board Material	PMMA、MS Structure Board、MS、PC板
Suitable For Sheet Thickness	0.5t-3t
Energy Used	1.5KW
Exterior Color	Ivory/Ivory
Voltage	Three-Phase 380V
Total Weight Of Equipment	1.5T
Operation Method	Operation Panel (touch type)
Control Method	PLC Control Program

QQ图片20210304154628.png

This is an unprocessed V structure, because there are fewer lamp beads,

The middle indirect distance is far, the light enters the LGP lamp

As a result, there are obvious dark areas between the lamp beads, which affects the overall picture quality.This defect is a HOTSPOT defect

。

This is the V structure of the light-incident end surface processing, changing the original lamp

The light entering direction, the light entering is the original direct light

Change into the V-shaped included angle after processing to fill in the lamp beads

The dark area between the gaps.